Kamvas Pro 16(2.5K)
Connection

Kamvas Pro 16(2.5K) supports both computers and Android devices. The following are ways of connection for reference. 

Connect via a Three-in-two Cable

Connect the pen display to your computer via a three-in-two Cable.

1.Take out a three-in-two cable from the package and connect the pen display to a computer through it.

2.Connect the power adapter to a power cable. 

*The extended cable helps to connect the display to the power supply if the power cable is too short. Any USB power adapter is usable as long as the output is 5V, 3A. 

连接2.jpg

Connect via a Full-featured USB-C to USB-C Cable

Connect the pen display to your computer or any Android device via a full-featured USB-C to USB-C cable.

1.Take out the full-featured USB-C to USB-C cable and connect the display to a computer or Android device through it. 

2.Connect the power adapter to a power cable. 

*Users can buy a full-featured USB-C to USB-C cable or a power cable separately, but make sure the former supports at least USB3.1 GEN1 data transfer protocol & DP1.2 and the output is at least 5V, 3A. 

连接3.jpg