Select the Working Area tab to adjust the ratio of the distance of pen movement on the pen tablet to that of the corresponding cursor movement on the monitor. By default, the entire active area of the pen tablet maps to the whole monitor. 

If more than one monitor is in use and they are in extended mode, users need to choose one that will be mapped to on the driver interface and the other one as the external display.

In mirror mode (All monitors display the same content), the pen tablet maps to the entire screen on each monitor and cursors displayed on them move simultaneously. 

1. Working Area Setting

Note: After your smart digital notebook is connected to the other device and the driver is turned on, by default the Screen Ratio mode is enabled and the aspect ratio of the active working area of Huion Note hardware will be the same as that of the monitor. 
Define the active working area of Huion Note X10 that will be mapped to the monitor. Three modes on the driver can be chosen:

[1] Full Area: The entire active area of the pen tablet will be mapped to the monitor. 

[2] Screen Ratio: The aspect ratio of the active pen tablet area depends on that of the connected monitor screen. In Screen Ratio mode, these two ratios keep the same.

[3] Custom Area:

1> Enter coordinate values.

2> You can adjust the working area of the pen tablet by changing the outlines of the smaller rectangle. You can also drag the two blue rectangles to select the active areas of the digital pen on the screen and the pen tablet. (See pictures 1 and 2).                                                                                                                      Picture 1                                                                                                                         Picture 2