Inspiroy Dial 2
User Manual
Dial Setting

You can use any dial controller separately or use it to work with Windows Radial menu. The function of a dial controller can be programmed in Huion driver. To change or customize the tools of Windows Radial menu, please go to Windows Settings > Devices > Wheel. In addition, you can press the function-switch button to switch between three functions of a dial controller or different tools of your Windows Radial menu. 

Use the dial controller separately

image.png

1.Open the driver and click “Dial Setting”. 

2.Choose Dial 1 (Dial 2). 

3.Select “Customize”. 

4.Drag the slider to select the sensitivity of Dial 1. 

5.Turn the dial controller clockwise or anti-clockwise to use it. 


Note: There are three default functions for every dial controller and any of them can be changed. 
To change the functions of the dial controller, please follow the instructions: 

1.Select “Customize” on the “Dial Setting” interface of the driver. 

image.png


2.Click Dial 1 (Dial 2) on the picture of Inspiroy Dial 2 on the “Pen Tablet” interface. 
image.png
image.png

3.Choose the functions you want to assign to Dial 1 (Dial 2). 

*For detailed information about the functions of a dial controller, please refer to the table of settings below. 

 DefaultThe default three functions of a dial controller are “Zoom in/out”, “Adjust Brush Size”, and “Scroll Up/Down”. 
 MultimediaYou can turn the dial controller to play the previous song or next song. You can also rotate it to turn the volume up and down. 
 CustomizeClick on the input box (Clockwise/Anticlockwise) and enter a valid key combination to create a shortcut. You can turn the dial controller clockwise or anticlockwise to perform the shortcuts you entered. 
 NoneSelecting “None” means the dial controller will perform no function when you turn it. 



Use the dial controller to work with Windows Radial menu

image.png
1.Open the driver and click “Dial Setting”. 

2.Choose Dial 1 (Dial 2). 

3.Select “Radial”. 

4.Turn the dial controller clockwise or anti-clockwise to use it.


*To change the tools of your Windows Radial menu, please follow the instructions below:

1.Select “Radial” on the “Dial Setting” interface of the driver. 

2.Go to Windows Settings > Devices > Wheel. 

3.Choose the default tools for the Radial menu or customize the tools.